Óra építése - Building a Clock

Lixie Clock with EsP8266 server
morvfer
Site Admin
Hozzászólások: 10
Csatlakozott: 2017. május 15., hétfő 15:49

Óra építése - Building a Clock

Hozzászólás Szerző: morvfer » 2019. június 2., vasárnap 15:24


Egy videó róla:

A video about it:



Lixie Óra
Lixie Clock

Mérete: kb 40x5,5x9 centiméter, keret egyéni méret lehet!
Size: approximately 40x5.5x9 centimeters, the frame can be customized!

Így készült:
Here's how it was made:

A számok és a pontok 2mm plexiből gravírozva és vágva, dxf file letőlthető a képre kattintva:
The numbers and dots are engraved and cut from 2mm plexiglass, and the DXF file can be downloaded by clicking on the image.

Kép


Elektronika rész asztalon összerakva:
Electronics assembly on a table:



D1 mini és ledpanel összekötése: 5V GND és D5 lábak, természetesen a következő panel az előző panelhez csatlakozik.

Connecting D1 mini to LED panel: connect 5V, GND, and D5 pins. Of course, the next panel is connected to the previous panel.

Elektronikai alkatrészek:
Electronic components:

6 db áramköri panel a számoknak
2 db áramköri panel a pontoknak
124 db WS2812B Neopixel Led
1 db 1000uF kondenzátor
15 db 100nF kondenzátor (0805)
1 db Arduino D1 mini ESP8266, az óra programja rátöltve!
1 db micro USB kábel

6 circuit boards for the numbers
2 circuit boards for the dots
124 WS2812B Neopixel LEDs
1 1000uF capacitor
15 100nF capacitor (0805)
1 Arduino D1 mini ESP8266, with the clock program uploaded!
1 micro USB cable


Kép

A wifi beállítás ugyanaz mint a másik óránál, csak itt LixieAP lesz a megjelenített wifi hálózat.
The wifi setup is the same as on the other clock, only here the displayed wifi network will be LixieAP.

wifi beállításának leírása - Description of wifi setup

Az 1000uF kondenzátort az utolsó panelra kell tenni, alulról.

10 ledenként 1 db 100nF (0805) kondenzátort a panelra alulról kell forrasztani!

The 1000uF capacitor should be placed on the last panel, from the bottom.

Every 10 LEDs, solder 1 piece of 100nF (0805) capacitor onto the bottom side of the panel!


Kép

A pontok panelján van egy összekötési pont, azt össze kell kötni. Arra készült a panel, ha a jövőben szeretném tovább fejleszteni, akkor további 8 led rárakható a panelra, egyéb funkciók kijelzéséhez.
There is a connection point on the points panel that needs to be connected. The panel was designed for future development, so if I want to expand it in the future, I can add another 8 LEDs to the panel for displaying other functions.

Most csak 2 led kerül a panelra, Led1 és Led10
For now, only 2 LEDs will be added to the panel, Led1 and Led10.


Kép

Nem lesz könnyű a megépítés de a végeredmény miatt megéri vele dolgozni.
Building it won't be easy, but it's worth the effort for the end result.

A led-ek polaritására figyelni kell a beforrasztáskor!
Be sure to pay attention to the polarity of the LEDs during soldering!


Kép

Kép


A pontos időt NTP-ről szedi, a Wifi beállítás után böngészőből tudjuk finomhangolni.
Ha már beállítottuk a wifit, akkor felcsatlakozik a hálózatra, ahol böngészőből lehet a kijelzést, dátumot, éjszakai időszakot, színeket állítani.
Az IP címet a routerben kell megnézni, hogy épp melyiket osztotta ki neki, majd ezt az IP-t a böngészőbe beírni.

The clock fetches the exact time from an NTP server and after setting up the WiFi, we can fine-tune the clock settings from a web browser. Once the WiFi is set up, the clock will connect to the network, and we can adjust the display, date, night mode, and colors from the web browser.

To access the clock settings, we need to check the IP address that the router assigned to the clock and enter it into the web browser.


Kép


A tartó keretet 3D nyomtatóval nyomtattam ki, STL file letölthető a képre kattintva:
I printed the holder frame using a 3D printer, and the STL file can be downloaded by clicking on the image.

Kép


Ha tudsz 40 centit egyben nyomtatni, akkor itt van egyben az STL:
If you can print 40 centimeters at once, then here is the STL file all at once:

Kép

Válasz küldése

Ki van itt

Jelenlévő fórumozók: nincs regisztrált felhasználó valamint 2 vendég