Device Benefits and Technical Parameters
Description of the colloidal silver generator device. The device allows you to produce a very high-quality solution with the concentration that suits your needs. To produce good quality colloid, it is important that the electrode current is **1 mA** and that the device automatically changes the polarity of the electrodes. Below 1mA, the colloid production time is significantly extended, and above 1mA, the size of the silver "particles" in the solution will be larger.
Technical Parameters
- Electrode Voltage: 55 - 60V DC
- Electrode Current: Set to 1 mA
- Polarity Change: Every 60 seconds
Warning! 99.99% purity of the silver electrode is mandatory! Do not source from uncertain places! Jewelers do not use silver of this purity.
Device Use and Preparation
Connect the silver electrodes to the device. Hand-tightening the screw clamps for the silver electrodes is sufficient. Do not use a screwdriver, as you may over-tighten and damage the electrode. Place the thus prepared device onto the glass filled with distilled water:
- Use **distilled water purchased from a pharmacy** for colloidal silver production!
- Tap water or water purified with a reverse osmosis water purifier is not suitable!
If the electrodes are in water, the "electrode current" LED lights up. The green (polarity change) indicator LEDs switch every 60 seconds. Colloid production takes 6-48 hours, depending on the quantity and temperature. You can monitor the progress with a TDS meter. Heating can speed up the process, but never exceed 56 degrees Celsius!
Concentration Measurement and Storage
After switching on the TDS meter, immerse it in the colloid, and the concentration of the solution can be read on the display. Measurement accuracy: 1 ppm (1mg/l). Distilled water purchased from a pharmacy has a "0" concentration. It is recommended to prepare the colloidal solution to a **10 ppm concentration**. More is not better; do not use concentrations above 20 ppm internally!
Store the prepared colloid in a dark glass, shielded from light, and keep it away from strong electromagnetic field sources (computer, television, mobile phone, microwave oven, etc.) and sunlight. It should not be frozen.
What ensures the best quality?
The device uses timed intervals that induce a jump-like pole change on the silver electrodes. These electrodes are made of 99.99% pure silver. The best quality is achieved by pairing the time intervals with a very precise and constant current load on the electrodes, which changes automatically and continuously due to the silver saturation of the colloidal solution. Devices that produce colloidal silver in a few minutes or hours are not capable of producing the same quality solution, and the effectiveness of such improperly manufactured solutions is very limited and questionable. If you shine a laser pointer through the colloidal silver in complete darkness, the visible laser beam shows a fine trace in the colloidal silver. This phenomenon is called the **TYNDALL EFFECT**, and it is one of the important tools for measuring the quality of colloidal silver.
The colloidal solution has 98% absorption of minerals, compared to 40-60% absorption from tablets. Particle size is 3-5 nanometers. The smaller the particles, the larger the total surface area at the same concentration (ppm), the greater its effectiveness against pathogens, and the faster it is eliminated from the digestive system by all means. If the particles are larger (a non-quality colloidal silver solution), there is a risk of accumulation in the liver.
Colloidal Silver in History and Its Characteristics
Chemical Characteristics and Application
Colloidal silver is characterized by being **chemically neutral** to all liquids and medications, including antibiotics. It does not irritate the digestive system, meaning that people suffering from acute stomach acid, heartburn, cramps, and other digestive problems can safely use colloidal silver. Colloidal silver destroys not only pathogenic bacteria but also body-friendly bacteria, just like antibiotics do. Therefore, it is necessary to renew these bacteria by consuming probiotics. The effectiveness of silver ions is also very important.
Benefits of Colloidal Silver
Benefits of using quality colloidal silver:
- Safe
- Non-toxic
- Acts as an antibiotic
- Destroys over 650 pathogens
- Destroys fungi and molds
- Aids cell development
- Does not accumulate in the body
- Does not irritate mucous membranes
- Is not addictive
- Does not contain free radicals
- Cleanses and disinfects water
- Has anti-inflammatory effects
- Disinfects
- Penetrates directly into tissues
- Does not irritate the eyes
- Does not react with other medications
- Strengthens the body's immunity
- Safe for pregnant and breastfeeding mothers
- Colorless and Odorless
- Higher absorption (98%) than tablets (40-60%)
History and Application of Silver Treatment
The antimicrobial properties of silver were noted by ancient Indian medicine. The golden age of colloidal silver was in the interwar period as a primary medication for treating certain infectious diseases, but sulfonamides and later antibiotics appeared during the Second World War. The fact that natural substances in their pure form cannot be patented as medicines also played a role to the detriment of colloidal silver, paving the way for large pharmaceutical businesses.
In 1993, it became public that both American and Russian astronauts carried colloidal silver kits. In 1997, the Chief Physician of the US Department of Defense named **colloidal nanosilver** the most effective antiviral, antibacterial, and antiseptic agent for military operations.
Methods of Colloidal Silver Application
The most effective method for internal use is generally drinking it morning and evening while consuming probiotics. Mouthwash, gargling, and nasal cavity rinsing can be performed. Vaginal rinsing, rectal disinfection, and ear cleaning can also be done with it.
It is also excellent for external treatment of acne, rashes, eczema, abrasions and cuts, insect bite sites, and especially areas affected by fungi. Colloidal silver is one of the most effective liquids against generalized fungal infections of the body.
For pets, colloidal silver can be used to treat wounds and rashes, and to disinfect their toys and bowls. Even house plants can be watered with colloidal silver if they are infected.
Official Medical Applications (1933-1939):
- Acne
- Arthritis
- Itching (Pruritus)
- Gastritis
- Burns
- Diabetes
- Colitis
- Cystitis
- Eczema
- Stomach Ulcer
- Intestinal Fungus
- Rheumatism
- Sinusitis
- Dermatitis
- Pneumonia
- Psoriasis
- Infectious Diarrhea
- Keratitis
- Herpes
- Skin Fungus
- Middle Ear Infection (Otitis Media)
- Prostate Enlargement
- Blepharitis (Eyelid Inflammation)
- Nasal Discharge
- Influenza
- Pancreatitis
Electrode Maintenance
Always wipe the electrodes with a paper towel after use. Clean the electrodes only mechanically; never use liquid cleaning agents. A simple dishwashing sponge with a coarse surface is perfectly suited for this maintenance. The cleanliness of the electrodes and the purity of the distilled water are behind the successful production of the highest quality colloidal silver.
Purchasing Options and Prices
The following prices are given in **EURO (€)**.
Accessories can also be purchased separately!
Assembled Device (with Display)
- ✅ Pre-assembled, tested device
- ✅ 2-year warranty
- ❌ Without electrode and TDS meter
99.99% Silver Electrodes
- ✅ 2 pieces, 10 centimeters long, 2 millimeters diameter
- ✅ 99.99% pure silver
Digital TDS Meter
- ✅ Perfect for measuring colloid concentration
Complete Package
(Device with Display, Electrodes, and TDS Meter)
Very favorable package offer!
(Original price: 135 EUR)
- ✅ Device (with Display, 90 EUR)
- ✅ Electrodes (35 EUR)
- ✅ TDS Meter (10 EUR)
Ordering
I accept orders exclusively via e-mail!
Please, contact me via e-mail for international orders.
Legal Disclaimer
This device is not suitable for diagnosing, treating, curing, or preventing any disease. The above characteristics and effects may vary from person to person. Careful consumption is recommended when taking medication concurrently, consulting with a specialist. Colloidal silver can be a supplement to medical treatment. Consult your doctor if you have any health complaints!
Important Information and Updates
Update: October 1, 2019
Pharmacies sell several types of distilled water, but unfortunately, not all are suitable for colloid production. Ask for **Ph. Hg. VIII.** certified water at the pharmacy. As an aid, I have photographed the label of the correct water; it is shown here:
Update: July 1, 2023
In the past period, distillation devices have become available at favorable prices, so many people have purchased them but complain that they cannot produce "0" purity water. Here I share how I make distilled water with such a distillation device:
You need to pour 4 liters of water into the device, from which about 2.5 liters of distilled water will eventually result. At my place, tap water runs at about 250-300 PPM, which I further filter with a reverse osmosis water purifier, resulting in 13-18 PPM water.
I boil this 13-18 PPM water with an electric kettle and pour it hot into the distillation device. I pre-boil it because the distillation device is 750W; if I pour cold water into it, it will take a long time to heat up until the water boils inside. With an electric kettle, this is done quickly, so the hot water enters the distillation device, which starts dripping the distilled water after a few minutes of starting.
Here is the crucial part:
It is important to mention that the method of making good quality distilled water was not invented by me; I only apply the experience of experienced pálinka-making specialists!
At the beginning of distillation, the dripping water is not yet suitable; at this point, I only place a glass under the device to collect the distilled water. When there is enough water in the glass to measure, I put the TDS meter in and measure it. As long as the TDS meter shows a value other than "0", I continuously repeat the process: a clean glass under the distillation device, and measuring the outgoing water again. When the water coming out of the device is "0", I place its container under it and can leave it there; only clean "0" water will come out from then on. If we do not remove the first 1-1.5 deciliters at the beginning, but keep it with the total quantity, it will degrade the quality, as the first 1 deciliter is often worse than the quality of the water poured into the distillation device.
If distilled water is needed for colloidal silver production, "0" PPM water is mandatory!